Alsace Lorraine AGENCY
2 rue du Vercors 57150 CreutzwaldAlsace Lorraine AGENCY
2 rue du Vercors
57150 Creutzwald
03 87 82 45 68
Contact commercial
Maxime JUNG - 07 86 89 33 87Contact commercial
Maxime JUNG
Technico-commercial Est & Allemagne
jung@sematec-metrologie.com
07 86 89 33 87
Contact technique
Manon HUPPERT - 03 87 82 45 68Contact technique
Manon HUPPERT
Directrice agence Est
huppert@sematec-metrologie.com
03 87 82 45 68





Metz metrology: 3D CMM measurement services, scanning arm and laser tracker in the Grand Est
The East laboratory is located in Creutzwald (57), 25 minutes from Metz. Thanks to its location, cities such as Metz, Nancy, Strasbourg, Mulhouse, Belfort, Reims etc … are easily accessible, allowing us to be responsive.
In the laboratory, we provide 3D measurement services on all types of parts (CMMs equipped with PC-DMIS and COSMOS software, as well as CALYPSO offline), 2D measurements on a MICRO-VU optical machine (INSPEC software) as well as services roughness and profile Formtracer type device. We also offer on-site trips to replace a metrologist (leave, load, departure, etc.), or for training in 3D measurement.
Laboratory services
-Three-dimensional (CMM) and optical measurement
-Conventional measurement (caliper, micrometer, column, etc.)
– Services on customer site:
-Measure (customer CMM, 3D measuring arm)
-Digitalisation (point cloud, reverse design on customer site)
-Specialty East laboratory: Measurement of profiles and roughness
-CALYPSO, PCDMIS, COSMOS, METROSOFT, INSPEC, POLYWORKS technician in laboratory and on customer site.
-Control assembly (design, realization)
-Know-how in control 1st article: Initial samples, capabilities, R & amp; R, …
-3D measurement training center (N ° 823 804 346 38)
-Provision of advice, audit and customer support
Three-dimensional Measuring Machines
o MITUTOYO CRISTA APEX (900x1000x600) Head PH10MQ
o DEA GLOBAL PERFORMANCE (1200x2200x1000) Tesa Star 2.5 scanning head
o DEA PIONEER (500x600x400)
Optical measuring machine:
MICROVU Excel 502 µM (500x400x250) module 4 integrated probes
o Conventional measurement
Scanning measuring arm:
o 2.5m probing and scanning measuring arm
Mastered software
PDCMIS, CALYPSO, COSMOS, POLYWORKS, INSPEC, FORMTRACEPACK.
Do you want to contact us directly? Here are the contact details of our 6 laboratories in France:
Auvergne-Rhônes Alpes Agency
04 74 54 61 66Midi Pyrénées-Occitanie Agency
05 61 56 59 94Sematec South West
Zac de Menude,
4 impasse Ada Lovelace, Lot 2
31830 PLAISANCE DU TOUCH
05 61 56 59 94
Pays de Loire agency
02 41 58 91 91Sematec West
rue de l’Aujardière
ZI du parc V
49280 SAINT CHRISTOPHE DU BOIS
02 41 58 91 91